Publicité
Les langues disponibles
Les langues disponibles
:STATe 0|OFF|1|ON, (@chanlist)
:RANGe <value>, (@chanlist)
:SLEW
[:POSitive]
[:IMMediate] <value>|INFinity, (@chanlist)
:MAXimum 0|OFF|1|ON, (@chanlist)
:COUPle 0|OFF|1|ON, (@chanlist)
:NEGative
[:IMMediate] <value>|INFinity, (@chanlist)
:MAXimum 0|OFF|1|ON, (@chanlist)
[SOURce:]
DIGital
:INPut
:DATA?
:OUTPut
:DATA <value>
:PIN<1-7>
:FUNCtion <function>
:POLarity POSitive|NEGative
:TOUTput
:BUS
[:ENABle] 0|OFF|1|ON
[SOURce:]
EMULation <type>, (@chanlist)
[SOURce:]
FUNCtion CURRent|VOLTage|RESistance|POWer, (@chanlist)
[SOURce:]
LIST
:COUNt <value>|INFinity, (@chanlist)
:CURRent
[:LEVel] <value>{,<value>}, (@chanlist)
:POINts? (@chanlist)
:DWELl <value>{,<value>}, (@chanlist)
:POINts? (@chanlist)
:POWer
[:LEVel] <value>{,<value>}, (@chanlist)
:POINts? (@chanlist)
:RESistance
Keysight N6705C User's Guide
Enables/disables the over-current protection.
Sets the output current range.
Sets the current slew rate. (N678xA SMU, N679xA)
Enables/disables the maximum slew rate override. (N678xA SMU,
N679xA)
Sets the current slew tracking state. (N679xA)
Sets the negative current slew rate. (N679xA)
Enables/disables the maximum slew rate override. (N679xA)
Reads the state of the digital control port.
Sets the state of the digital control port.
Sets the function of the pins.
DIO |DINPut |FAULt |INHibit |ONCouple |OFFCouple |TOUTput |TINPut
Sets the polarity of the pins.
Enables/disables BUS triggers on digital port pins.
Specifies the emulation mode on models N678xA SMU.
PS4Q |PS2Q |PS1Q |BATTery |CHARger |CCLoad |CVLoad |VMETer |AMETer.
Sets the output priority mode. (N678xA SMU, N679xA)
Sets the list repeat count.
Specifies the setting for each list step.
Returns the number of list points (same as steps).
Specifies the dwell time for each list step.
Returns the number of list points (same as steps).
Specifies the setting for each list step. (N679xA)
Returns the number of list points (same as steps). (N679xA)
1 Quick Reference
35
Publicité
