Publicité
Les langues disponibles
Les langues disponibles
3 Using the Source/Load Functions
Configuring User-Defined Arbs
User-defined Arbs can contain up to 511 current, voltage, power, or resistance steps that are entered
individually in the User-defined Properties window. Power and resistance steps apply to
You can populate the User-defined Arb with values from a previously configured "standard" Arb and
then edit the steps in the User-defined Properties window. To convert one of the standard Arbs to a
user-defined Arb, refer to
You can also import a User-defined Arb that was previously created using a spreadsheet as explained
later in this section under
Step 1. Select the Arb Type and Shape. Power and resistance types apply to
Press the Arb key twice or press the Arb key and then Properties to access the Arb Selection window.
In the Arb Type dropdown, select the Arb type. Then select User-Defined.
Step 2. Configure the User-Defined Properties:
Press the Properties key or select the Arb Properties button. Then program the following parameters:
106
Configuring Parameters Common to all Arbs
Importing and Exporting Arb
at the end of this section.
Data.
Keysight N6705C User's Guide
:
:
Publicité
