Télécharger Imprimer la page

Keysight N6705C Mode D'emploi page 26

Masquer les pouces Voir aussi pour N6705C:

Publicité

Les langues disponibles

Les langues disponibles

1 Quick Reference
Command Quick Reference
Some [optional] commands have been included for clarity. All settings commands have a
corresponding query.
ABORt
      :ACQuire (@chanlist)
      :DLOG
      :ELOG (@chanlist)
      :HISTogram (@chanlist)
      :TRANsient (@chanlist)
CALibrate
      :COUNt?
      :CURRent
[:LEVel] <value>, (@channel)
            :LIMit
                  :NEGative <value>, (@channel)
                  :POSitive <value>, (@channel)
            :MEASure <value>, (@channel)
            :PEAK (@channel)
      :DATA <value>
      :DATE <"date">, (@channel)
      :DPRog (@channel)
      :LEVel P1|P2|P3
      :PASSword <value>
      :RESistance 20 | 6, (@channel)
      :SAVE
      :STATe 0|OFF|1|ON
      :VOLTage
[:LEVel] <value>, (@channel)
            :CMRR, (@channel)
            :LIMit
                  :POSitive <value>, (@channel)
            :MEASure <value>, (@channel)
                  :AUXiliary, (@channel)
DISPlay
[:WINDow]
[:STATe] 0|OFF|1|ON
            :VIEW METER1 | METER4
26
Cancels any triggered measurements.
Stops internal data logging.
Stops external data logging.
Stops the histogram current measurement. (N6781A/82A/85A/86A)
Cancels any triggered actions.
Returns the number of times the unit has been calibrated.
Calibrates the current programming.
Calibrates negative current limit. (N678xA SMU, N6783A-BAT)
Calibrates positive current limit. (N678xA SMU, N6783A, N679xA)
Calibrates the current measurement.
Calibrates peak current limit (N675xA, N676xA)
Enters the calibration value read by the external meter.
Stores the calibration date in nonvolatile memory.
Calibrates the current downprogrammer.
Advances to the next level in the calibration.
Sets a numeric password to prevent unauthorized calibration.
Calibrates the output resistance. (N6781A, N6785A)
Saves the calibration constants in non-volatile memory.
Enables or disables calibration mode.
Calibrates the voltage programming.
Calibrates the voltage common mode rejection ratio. (N675xA, N676xA)
Calibrates positive current limit. (N678xA SMU)
Calibrates the voltage measurement.
Calibrates the auxiliary voltage measurement. (N6781A, N6785A)
Turns the front panel display on or off.
Selects 1-channel or 4-channel meter view.
Keysight N6705C User's Guide

Publicité

loading