Publicité
Les langues disponibles
Les langues disponibles
6 Advanced Source, Measurement, and Control
LIVE - allows the enabled output to follow the state of the Inhibit input. When the Inhibit input is true,
the output is disabled. When the Inhibit input is false, the output is re-enabled.
OFF - The Inhibit input is ignored.
From the front panel:
To configure the digital input function, press the Menu key, scroll down and select the Utilities item,
then select Digital I/O. Then press Enter. The Digital I/O window will appear as previously shown
under
Bi-directional Digital
I/O.
Select pin 3 from the Pin dropdown list.
Select the Inhibit In function for the pin the from the Function dropdown list.
Configure the polarity for the pin by selecting the Polarity dropdown menu. Select either Positive or
Negative
Next, you must configure the Inhibit Input mode. Press the Settings key to access the Source Settings
window. Navigate to and select Protection, then Advanced. Then press Enter.
From the remote interface:
To select the Inhibit function:
DIG:PIN1:FUNC INH
To select the pin polarity:
DIG:PIN1:POL POS
DIG:PIN1:POL NEG
To set Inhibit mode to Latching:
OUTP:INH:MODE LATC
To set Inhibit mode to Live:
OUTP:INH:MODE LIVE
To disable the Inhibit signal:
OUTP:INH:MODE OFF
Keysight N6705C User's Guide
229
Publicité
