Publicité
Les langues disponibles
Les langues disponibles
For power modules, you can programmatically query the model number, serial number, installed
options, voltage, current and power rating. Send the following commands:
SYST:CHAN:MOD?(@1)
SYST:CHAN:OPT?(@1)
SYST:CHAN:SER?(@1)
You have the ability to change the identity of the mainframe. This functionality is only
intended for compatibility with previous "A" and "B" version mainframes. To change the
identity refer to
View the Error Log
To display the error log, press the Menu key, scroll and select Utilities, then Error Log.
Errors are stored in the order they are received. The error at the end of the list is the most recent
l
error.
If there are more errors than can fit in the queue, the last error stored is replaced with -350,"Error
l
queue overflow". No more errors are stored until you remove errors from the queue. If there are no
errors, the instrument responds with +0,"No error".
Except for selftest errors, errors are cleared when exiting the Error Log menu or when cycling
l
power.
If you suspect that there is a problem with the power analyzer, refer to the Troubleshooting section in
the Operating and Service Guide document. Press Meter View to return to the Meter View.
From the remote interface:
The following command reads and clears one error from the error queue:
SYST:ERR?
Keysight N6705C User's Guide
*IDN
Setup.
3 Using the Source/Load Functions
83
Publicité
