Publicité
Les langues disponibles
Les langues disponibles
Turn the Voltage and Current knobs. The output voltage or current setting changes when they are
turned. The output also changes if it is enabled. These knobs are active in Meter View, Scope View,
and Data Logger mode.
Step 4. Enable the Output
Press the color-coded On key to enable an individual output. When an output is on, the On key for that
output is lit. When an output is off, the On key is not lit. The All Outputs On and Off keys turn all outputs
on or off simultaneously.
The state of a disabled output (output off) is a condition of zero output voltage and zero source current
The red Emergency Stop key turns all outputs off immediately without any output off
delays.
When an output is enabled, the power analyzer continuously measures and displays the output
voltage and current of each output in Meter View.
Keysight N6705C User's Guide
Push the voltage and current knobs to access a pop-up dialog that lets
you:
1. Lock/Unlock the knobs.
2. Select limit parameters or select limit tracking on Keysight N678xA
SMU and N6783A.
3 Using the Source/Load Functions
81
Publicité
