Publicité
Les langues disponibles
Les langues disponibles
1 Quick Reference
:VOLTage
[:LEVel] <value>, (@chanlist)
:SLOPe POSitive|NEGative, (@chanlist) Sets the voltage trigger slope.
:ARB
:SOURce <source>
:DLOG
[:IMMediate]
:CURRent
[:LEVel] <value>, (@chanlist)
:SLOPe POSitive|NEGative, (@chanlist) Sets the current trigger slope of the data logger.
:SOURce <source>
:VOLTage
[:LEVel] <value>, (@chanlist)
:SLOPe POSitive|NEGative, (@chanlist) Sets the voltage trigger slope of the data logger.
:ELOG
[:IMMediate] (@chanlist)
:SOURce <source>, (@chanlist)
:HISTogram
[:IMMediate] (@chanlist)
:SOURce <source>, (@chanlist)
:MEASure
:TALign
:CORRection
[:STATe] 0|OFF|1|ON
:TRANsient
[:IMMediate] (@chanlist)
:SOURce <source>, (@chanlist)
40
Sets the voltage trigger level.
Selects the trigger source for the arbitrary waveform:
BUS |EXTernal |IMMediate
Triggers the internal data logger immediately.
Sets the current trigger level of the data logger.
Selects the trigger source for internal data logging:
BUS |CURRent<n> |EXTernal |IMMediate |VOLTage<n> |ARSK |OOOK
Sets the voltage trigger level of the data logger.
Triggers the external data logger immediately.
Selects the trigger source for external data logging:
BUS |EXTernal |IMMediate| PIN<1-7>
(HISTogram commands only apply to models N6781A/82A/85A/86A)
Triggers the current histogram immediately.
Selects the trigger source for current histogram:
BUS |EXTernal |IMMediate| PIN<1-7>
Improves the alignment of measurement triggers with measurement data.
Triggers the output immediately.
Selects the trigger source for the transient system:
BUS |EXTernal IMMediate |PIN<1-7> |TRANsient<1-4>
Keysight N6705C User's Guide
Publicité
