Appliance Description; Description Of Food Transport Trolley - Hupfer SPTW-2 Mode D'emploi

Chapter 3
Page 12
3.4

Appliance Description

3.4.1

Description of food transport trolley

Figure 1
1 Worktop
2 Door lock
3 Heated cupboard door
4 Bumper strip
5 Fixed caster
3.4.2 Appliance Description
Food transport trolleys are completely made of stainless steel and have a strong, self-supporting construc-
tion.
They hold up prepared meals in gastronorm containers, on grids or in baskets and keep them warm in heat-
ed cupboards. The cupboard doors are double-walled, sound absorbing and thermally insulated. Due to the
thermal insulation, adjacent heated cupboards are not affected, so that the heated cupboard compartments
are also suitable as cooling compartments if cold storage plate are used. The door lock can be easily un-
locked with one hand.
The operating temperature for each heated cupboard compartment can be chosen separately. There are
thermostats on the front side of the food transport trolley that are used to set the operating temperature con-
tinuously between 86°F and 176°F (30°C and 80°C) for every cupboard compartment. Thereby the digits on
the thermostats help to allocate to the corresponding heated cupboard compartments.
Ergonomically formed push bars with integrated bumper protect your hands against injuries. The side walls
as well as the operating and display elements are protected against damage by corner bumpers.
The cupboard compartments can be cleaned quickly and easily.
Food transport trolley
SPTW-2 | SPTW-3
View of the appliance SPTW-2
Description and Technical Data
6 Swivel caster with total brake
7 Thermostat for setting the temperature
8 On / Off switch
9 Connecting lead with mains plug
10 Push bars
Appliance Description
4330038_A1