Operation; Arrangement And Function Of The Operating Elements; Tempering - Hupfer SPTW-2 Mode D'emploi

Operation

Arrangement and Function of the Operating Elements

5 Operation
WARNING
The food transport trolley must be checked for external visible damages and defects before each operation.
Before putting the appliance into operation, the heated cupboards of the appliance must be clean.
5.1 Arrangement and Function of the Operating Elements
The operating elements of the food transport trolley are arranged on the front side of the appliance.
The digits on the thermostats can be allocated to the heated cupboards.
Figure 3
5.2 Operation
WARNING
5.2.1

Tempering

The On/Off switch and the thermostats for the heated cupboards are arranged on the front side of the food
transport trolley.
If a cupboard compartment is used as a cooling compartment, adjacent heated cupboards can be normally
operated due to the thermal insulation.
4330038_A1
Risk of hot surfaces
If the thermostat is set to the level 3 and higher, the permitted maximum tem-
perature of 149°F (65°C) for touchable appliance surfaces can be exceeded.
Direct contact with your skin can cause burns.
Only instructed staff may operate the appliance. Wear suitable protective
clothing.
Operating elements of the SPTW-2
Risk of hot surfaces
If the thermostat is set to the level 3 and higher, the permitted maximum tem-
perature of 149°F (65°C) for touchable appliance surfaces can be exceeded.
Direct contact with unprotected skin can cause burns.
Only instructed staff may operate the appliance. Wear suitable protective
clothing.
Chapter 5
Page 17
Food transport trolley
SPTW-2 | SPTW-3