Safety Instructions; Introduction; Warning Symbols Used; Safety Instructions For Appliance Safety - Hupfer SPTW-2 Mode D'emploi

Chapter 2
Page 8
2

Safety Instructions

2.1

Introduction

The chapter on safety instructions describes the risks associated with the appliance in terms of product liabil-
ity (according to the EU Directives).
The safety instructions should warn of hazards and help to avoid damages to persons, the environment and
property. Please make sure that you have read and understood all the safety instructions given in this chap-
ter.
You must comply with the respectively valid national and international Safety at Work Regulations. The
manager is responsible for the valid regulations he/she has to provide. He/she must acquaint himself/herself
and the operator with the new regulations.
In addition to these operating instructions, comply with the rules on health and safety at work issued by the
Main Association of the industrial Professional Associations, especially with those that concern the handling
of hot items and risks involved (BGR 110 "Protection of health and safety at work in restaurants" and BGR
111 "Protection of health and safety at work in large-scale kitchens").
2.2

Warning Symbols Used

Symbols are used in these operating instructions to point out the dangers that can occur while operating or
cleaning the appliance. In both cases, the symbol provides information on the type and circumstances of
danger.
The following symbols can be used:
2.3

Safety Instructions for Appliance Safety

Safe operation of the appliance depends on appropriate and thorough use. Negligent handling of the appli-
ance can lead to danger to life and limb of the user and / or third parties as well as hazards to the appliance
itself and the other operator's property.
The following points are to be observed to ensure the appliance safety:
§
The appliance may only be operated as intended, when it is in perfect condition with regards to tech-
nical standards, with awareness of safety and hazards and in accordance with the operating instruc-
tions.
§
All the operating and actuating elements must be in a perfect and functionally reliable condition with
regards to technical standards.
§
The appliance must be checked for external visible damage and defects whenever it is put into opera-
tion. In case of damages, inform immediately the competent bodies and switch off the food transport
trolley.
§
Modifications or retrofits of the equipment are only permitted in consultation with the manufacturer
and on receipt of his written agreement.
§
Move the appliance only with the doors closed. Unless the doors are closed, they can open during
transport and cause in damages or lead to injuries.
Food transport trolley
SPTW-2 | SPTW-3
General hazardous area
Hazardous electrical voltage
Risk of hot surfaces
Wear hand protection
Safety Instructions
Introduction
4330038_A1