ERROR CODE
ERROR CODE
The following error codes (ERROR) can be displayed if there is a fault in the LCD display:
ERROR CODE
FAULT
04
Control error
05
06
Undervoltage protection
07
Overvoltage protection
08
Motor fault
09
10
Controller temperature
too high
11
Sensor fault
12
13
Rechargeable battery tempera
ture too high
EN
78
REMEDY
1. Switch off the drive system
2. Take out and reinsert the rechargeable battery
3. Switch on the drive system
If the error continues to be displayed, contact customer
service.
Switch off the drive system and contact the customer ser
vice
1. Switch off the drive system
2. Check plugin contacts
3. Take out and reinsert the rechargeable battery
4. Switch on the drive system
If the error continues to be displayed, contact customer
service.
1. Switch off the drive system
2. Switch on the drive system again at the earliest after 30
min.
If the error continues to be displayed, contact customer
service.
1. Switch off the drive system
2. Take out and reinsert the rechargeable battery
3. Switch on the drive system
If the error continues to be displayed, contact customer
service.
1. Switch off the drive system
2. Take out the rechargeable battery and let it cool off for
at least 30 min.
3. Insert the rechargeable battery and switch on the
drive system
If the error continues to be displayed, take out the re
chargeable battery and contact customer service.