Control Display; Led Display - Prophete TREKKING Notice D'utilisation

BATTERY
(SEE ALSO THE CHAPTERS ON TECHNICAL DATA AND COMPONENT DESIGNATION|SCOPE OF DELIVERY)
- Side Click battery
- Carrier battery

CONTROL DISPLAY

(SEE ALSO TECHNICAL DATA AND COMPONENT DESIGNATION|SCOPE OF DELIVERY)

- LED display

- LCD display with operating unit
- EasyControl display
LED DISPLAY
The drive system is operated via the LED display on the left-
hand side of the handlebar.
Here you will find all the controls and information you need
for driving:
ON/OFF button
106
Plus button +
107
Assistance level
108
Light sensor
109
Battery charge state
110
Minus button –
111
SWITCH THE DRIVE SYSTEM ON/OFF
1. Insert the battery into the e-bike (see Battery chapter).
2. To wake the battery from sleep mode, press the button on the battery as needed.
3. Hold down the button
OPERATE THE DRIVE SYSTEM
- Frame battery
- Down tube battery
- LCD display
- TFT display
Switch the drive system on/off
Increase assistance level
Switch lighting on/off manually (see Lighting chapter)
Current assistance level (LED 0­5)
Sensor for display brightness of the LED display
Current battery charge state
Reduce assistance level
Switch the pushing aid on/off
of the LED display for approx. 1.5 seconds.
106
DRIVE SYSTEM
107 108
106
111
EN 37
109
110