Prophete TREKKING Notice D'utilisation page 135

EASY CONTROL DISPLAY
The drive system is operated using the EasyControl control
display on the left-hand side of the handlebar.
The display brightness is automatically controlled by a
brightness sensor. This also automatically controls the light-
ing system (see Lighting chapter).
Plus button +
129
Assistance level
130
Speed display
131
Battery charge state
132
Minus button –
133
ON/OFF button
134
SWITCH THE DRIVE SYSTEM ON/OFF
1. Insert the battery into the e-bike (see Battery chapter).
2. To wake the battery from sleep mode, press the button on the battery as needed.
3. Hold down the
134
The display switches off automatically after approx. 10 minutes as soon as the e-bike is no longer in use.
OPERATE THE DRIVE SYSTEM
The drive system assists you whilst pedalling with additional motor power up to a speed of 25 km/h. You
can freely choose between the assistance levels
1. Before or whilst driving, use the Plus
.
130
The higher the selected assistance level, the greater the motor assistance. The speed to be reached de
Increase assistance level
Switch lighting on/off manually (see Lighting chapter)
Current assistance level
Current speed
Current battery charge state
Reduce assistance level
Switch the pushing aid on/off
Switch the drive system on/off
button of the control unit for approx. 1.5 seconds.
or Minus
129
129
130
131
132
133
134
at any time:
130
button to select the desired support level
133
DRIVE SYSTEM
EN 43