DRIVE SYSTEM
pends to a large extent on various factors, such as:
- total weight (including rider and luggage),
- tyre pressure,
- gradient or incline,
- condition of the ground,
- wind conditions.
For systems with mid-mounted motor, the maximum assisted speed also depends on the gear engaged.
The higher the engaged gear, the higher the assisted speed by the mid-mounted motor.
If the pedals stop moving during the trip, the motor will also stop automatically after a short delay.
You can ride the e-bike like a normal bicycle with the drive system switched off or with assistance level
at "0" (no bars are visible on the display
DRIVING BEHAVIOUR WITH MOTOR ASSISTANCE
The driving behaviour of an e-bike with active motor assistance is sometimes very different from that of
a bicycle.
You should therefore adapt the assistance level of the motor to the outside environment (e.g. road sur-
face, traffic density, surface conditions), the speed and your own capabilities. For example, use either a
low level of assistance or no assistance at all when driving into tight bends or when driving at a slow
speed.
PUSHING AID
With the pushing aid you can accelerate the e-bike up to a speed of no more than 6 km/h without any
pedal movement.
1. Stand on the left-hand side of the e-bike.
2. Press the button
133
3. Keep the button
133
prematurely and the pedals aren't moving, the motor then stops automatically.
EN
44
).
130
until the push-to-assist symbol
pressed down until the pushing aid activates. If the button
lights up.
133
is released