Prophete TREKKING Notice D'utilisation page 144

DRIVE SYSTEM
must be completely closed with the protective cap.
• Be sure to read the operating instructions of the device you want to connect to
the USB charging socket. In this way you avoid operating errors (e.g. when con­
ACHTUNG!
necting), which may also lead to damage.
• Only use standard­compliant USB cables and cable/adapter combinations, as
otherwise the connected device or the USB charging socket may be damaged.
Plugging in the USB cable may also not be possible otherwise.
• Do not apply excessive force to the USB connector or when disconnecting the USB
cable. When plugging in, check that the USB plug is pointing in the right direction
and that it is not reversed or bent. Make sure it is fully inserted.
• Do not insert any foreign objects into the USB charging socket.
With the USB charging socket on the bottom side of the TFT display, you can operate or charge most de-
vices that can be powered via USB. The battery of the e-bike must be inserted and sufficiently charged
for this purpose.
SWITCH ON THE USB CHARGING SOCKET
1. Switch off the drive system (see Switch the drive system on/off chapter).
2. Open the protective cap of the USB charging socket on the TFT display and connect the external
device with a USB cable (MicroA/MicroB).
3. Switch the drive system back on (see Switch the drive system on/off chapter).
EN 52