Battery Charge State Indicator; Charging The Rechargeable Battery - Prophete TREKKING Notice D'utilisation

RECHARGEABLE BATTERY
The E-bike is equipped with a high-performance lithium ion rechargeable battery. The rechargeable bat-
tery supplies the drive system and the lighting with power.
The power of the rechargeable battery depends on its age, type and frequency of use, as well as mainte-
nance. The full performance (capacity) of a new rechargeable battery is only achieved after approx. 2–5
complete charging processes. Complete means that only one LED of the rechargeable battery charging
display is lit before charging and charging is not interrupted prematurely.
The rechargeable battery is a wear part and subject to natural capacity reduction in use. For more infor-
mation regarding warranty/guarantee, see the chapter warranty in these operating instructions.

BATTERY CHARGE STATE INDICATOR

You can read the battery charge state on the display or di-
rectly on the battery when the drive system is switched on*.
On the battery, press the button
.
163
With the frame battery, the charge state of the battery
is indicated by an LED:
blue LED 100 % ­ 31 % charge state
red LED 11 ­ 30 % charge state
red LED flashing 0 ­ 10 % charge state
* = With the hub battery, the charge level can only be read on the
display.

CHARGING THE RECHARGEABLE BATTERY

Charge the rechargeable battery completely again if possi-
ble after every ride. This type of rechargeable battery does
not suffer any memory effect. For the charging times of your
E-Bike, see the technical data. You can charge the rechar-
geable battery in or outside of the bike:
1. Switch off the drive system as described.
2. Push aside the protective cap of the charging socket
on the rechargeable battery.
3. Plug the mains cable of the charger into the mains so-
cket.
4. Connect the charging plug to the charging socket
/ / / /
165 166 167 168
/ / /
158 159 160 161
of the rechargeable battery (hub
/ /
162
160
161
162
163
164
DRIVE SYSTEM
158
159
160
EN 53