AVG
Average distance speed
RANGE
anticipated range
CADENCE
Revolutions/min
CAL
Energy consumption
TIME
Distance trip time
1. Select the individual modes by pressing the button
TRIP → ODO → MAX → AVG → RANGE → CADENCE → CAL→ TIME→
SETTING MODE
The setting mode allows you to make the following settings:
TRIP RESET
Reset the distance cyclometer (yes = reset)
UNIT
Switch between kilometres (Metric) and miles (Imperial)
BRIGHTNESS
Set the display brightness
AUTO OFF
Automatic shutting down of ebike when not in use
CLOCK
Set the time
VIBRATION
Switch button vibration on/off
KEY CARD
Switch transponder function on/off
Access the setting mode ("Setting") by pressing both the Plus
time for approx. 2 seconds.
Use the Plus
and Minus
143
button.
Exit the menu by pressing the Plus
or by confirming BACK and EXIT in the menu.
USB CHARGING SOCKET
DANGER OF DAMAGE!
• Do not use the USB charging socket when it is wet or while it is raining or snow
ing, as this may damage the connected device or ebike. In this case, the USB port
ACHTUNG!
buttons to select the individual menu items and confirm with the
146
and Minus
143
146
-
.
144
and Minus
143
146
buttons at the same time for approx. 2 seconds
DRIVE SYSTEM
buttons at the same
144
EN 51