Selecting The Program - Boston Scientific Bionic Navigator 3D 4.0 Manuel De Programmation

Bionic Navigator™ 3D 4.0 Programming Manual
The components on the Lead Group panel are described in the following table.
Component
1 Leads View
Lead Group Tabs
2
3 Central Point of
Stimulation (CPS)
4 Zoom

Selecting the Program

There are 16 Program slots available for programming. These Programs are arranged in a carousel in
the Basic panel. When a Program is selected, it will appear in the forefront, but therapy will be off by
default.
Figure 21: Occupied Slots on the Carousel
Once a slot is accessed and configured, that slot will be considered occupied. A numerical placeholder
that looks like will occupy that slot to signify that the slot has been programmed.
Bionic Navigator™ 3D 4.0 Programming Manual
92395591-02 32 of 1595
Description
Displays Leads and electrode programming for the selected Lead
Group.
Allows selection of a Lead Group. One tab is available for each of the 4
Lead Groups.
Center of stimulation field for the electrode combination, as denoted
by the letter A, B, C, or D. See "Electrode Programming" for additional
information. For active areas and how temp area CPSs are displayed,
see "Temporarily Saving Areas".
Note: This is not available in Manual Mode.
The Zoom feature allows the user to zoom in and out of the Leads View.
To zoom in, move the
out, move the to the left or press the
to the right or press the
button.
button. To zoom