Boston Scientific Bionic Navigator 3D 4.0 Manuel De Programmation page 22

Bionic Navigator™ 3D 4.0 Programming Manual
3 Placement/Grid
Lines
4 Stimulator Ports
5 Trash Can
Lead Options
6
Panel
Description
7
8 Retrograde
Check Box
9 Lead Group
LeadSync ™
10
Scan Button
11 Zoom
Configuring Leads from the Configuration Screen
1. Drag the desired Lead from the Lead Selection panel into the appropriate position within the
Lead Placement panel. The Lead snaps horizontally to the nearest Grid Line when released.
2. Connect the tail(s) of the Lead(s) to the appropriate port. Select the numbered circle of the
tail and drag it over the appropriate port and release.
3. Verify that each tail has been correctly assigned to the appropriate port.
Bionic Navigator™ 3D 4.0 Programming Manual
92395591-02 16 of 1595
Illustrates and records the mediolateral placement of the Leads. A Lead
can be dragged and dropped on to one of seven Grid Lines on the Lead
Placement panel.
Note: After placing the first percutaneous Lead in a Lead Group, only
alternating Grid Lines will be available for additional percutaneous Leads
that are placed in that Lead Group. To view all seven Grid Lines, remove all
but one Lead in any Lead Group.
Displays the OR Cable ports or Implantable Pulse Generator (IPG) ports
available.
Drag and drop individual Leads to the Trash Can to delete.
Contains the following information about a selected Lead (features 7
through 9).
For example, "1x8 Percutaneous".
If the Retrograde check box is selected, the orientation of the Lead has
been rotated 180 degrees (the distal end of the Lead is positioned caudal
to the insertion point).
The selected radio button tells you if a Lead is in Group 1, 2, 3, or 4.
See "Assigning a Lead to a Group" in this manual for additional information.
Initiates an electronic Lead scan. Refer to "Using LeadSync Technology".
The Zoom feature allows the user to either zoom in or zoom out from the
current image resolution. To zoom in, move the
button. To zoom out, move the
to the right or press the
to the left or press the button.