Saving A Programming Change; Completing The Programming Session - Boston Scientific Bionic Navigator 3D 4.0 Manuel De Programmation

The Therapy Evaluation Mode allows optimization and personalization of patient therapy by using
Schedules and patient-provided Therapy Ratings. The Therapy Rating indicates the effectiveness
of each Program during its use. Therapy Ratings and Schedule information are summarized in the
Program Usage and Therapy Optimization Report, which can be accessed on the CP (See "Reports"
section of this manual).
Schedules can be used for Therapy Evaluation at any point during a patient's treatment. For example,
during the trial, Therapy Evaluation can be used for the patient to evaluate each Program in the
Schedule provided. Therapy Evaluation can also be useful for the patient to easily evaluate multiple
neural dose options. This information can be used to identify the waveforms and stimulation patterns
(from specific Programs) that provide the best therapy. In the permanent implant setting, Therapy
Evaluation can be used to customize therapy by identifying the optimal neural target, optimizing energy
usage and neural dose, adjusting Program settings to maintain pain relief, and evaluating multiple
options over a longer duration.

Saving a Programming Change

After you have created the desired Areas, Programs, and Schedules (if available), ensure you save
your changes. The changes made are saved when exiting the Programs screen, selecting a different
program, navigating between the Programs screen and Schedules screen, pressing the Sync to
Stimulator button in the Schedules screen, or by completing a programming session.

Completing the Programming Session

To complete the programming session:
1. Select the
2. Select from a list of 3 options:
a. Disconnect from Stimulator: Leaves application open for a new programming
b. Exit Navigator: Closes the programming application
c. Turn off CP: Powers down the computer
3. After selecting any option, a pop-up will prompt you to save a report. Click Save to save the
PDF report or click Skip to continue without saving.
Quit button on the top toolbar.
session or to maintain access to reports, and tools.
Programming the Patient
Bionic Navigator™ 3D 4.0 Programming Manual
92395591-02 53 of 1595