Program Selection - Boston Scientific Vercise DBS Mode D'emploi

Battery Graphic

Program Selection

A stimulation program is a set of stimulation parameters that determine the patient's
therapy. A program may apply stimulation to up to four independent stimulation
fields or areas, depending on how the program is set up. For example, one area may
correspond to a right brain target, while another area may correspond to a left brain
target. The Remote Control can store up to four programs – numbered 1 through 4 –
for the patient to select and activate at any time.
Graphic
Note: If a patient tries to activate an empty program, nothing will happen.
To select a program:
P
1. Press the button from the Level screen to go to the Program screen.
From the Program screen, each additional
program number. Press to select the previous program number. The black
highlighted box shows where you are in the cycle. Pressing
returns you to the Level screen. Pressing from program 1 also returns you to the
Level screen.
The Stimulator's battery is full.
The Stimulator's battery is ok.
The Stimulator's battery is low.
A blank program slot.
A full program slot
The most recently activated or saved program.
The currently selected program slot
P
A reminder that the
Description
Description
button changes the selected program.
P
button press selects the next
P
91098825-07 Rev A 51 of 333
The Remote Control
from program 4
Physician Manual