Entering Patient Information - Boston Scientific Bionic Navigator 3D 4.0 Manuel De Programmation

Bionic Navigator™ 3D 4.0 Programming Manual
Figure 8: Assign a Patient Dialog Box

Entering Patient Information

1. Connect to a Stimulator. See "Connecting to a Stimulator" in this manual for additional
information.
2. Select the Patient Expander Bar to access the Patient Info screen (default).
3. Enter/edit information on the Patient Info screen.
4. Select the Save button to save the information entered.
Note: You can revert to the last saved version of the patient's information by selecting the
Revert button on the Patient Info screen.
The Patient Info
you to toggle between the Patient Info screen and the Pain Scale screen. See "Defining a Patient's
Pain" for information on the Pain Scale screen.
Note: A Stimulator must be connected to the CP in order to access the Patient Info and Pain Scale
screens. Refer to "Connecting to a Stimulator".
Bionic Navigator™ 3D 4.0 Programming Manual
92395591-02 10 of 1595
and Pain Scale
buttons on the left side of the Patient Info screen allow