Increasing/Decreasing Amplitude - Boston Scientific Bionic Navigator 3D 4.0 Manuel De Programmation

Bionic Navigator™ 3D 4.0 Programming Manual
the programming mode back to E-Troll or Navigate mode until only one Lead Group is used
for that Area.
3. Select Manual in the Programming Mode Drop-Down Menu.
Note: If desired, to minimize the number of contacts with polarity assigned, click on the
center of a contact before selecting Manual in the Programming Mode Drop-Down Menu.
4. Select a contact or the IPG case, and specify the polarity using the Polarity Control (see
Figure 19).
5. Continue selecting contacts and specifying polarities.
6. Optional: the Equalize control to equally distribute all cathodic and or anodic currents as
needed.
7. Adjust Amplitude until strength of stimulation is at the desired level.
8. Manually steer current using the Percentage Control (see Figure 19).
Note: Amplitude, Pulse Width or Rate may be adjusted at any time.
Manual Mode offers the option of using Prism™ Targeting Technology, which allows placement of
anodic or cathodic current on the IPG.
Note: When the Full View Tab is not expanded, Manual Mode Controls are unavailable. If the user
switches from Manual mode to either E-Troll or Navigate mode during manual programming, the CPS
will be detected and the electrode configuration will be changed to optimize stimulation. Any current on
the IPG case will be cleared.

Increasing/Decreasing Amplitude

To increase or decrease the amplitude of the selected Area:
1. Select and release the
amplitude. Select and hold the
Note: Alternatively, the Remote Control up button may be used.
2. Select and release the
amplitude. Select and hold the
to decrease amplitude by 25% of current value.
Note: Alternatively, the Remote Control down button may be used
To increase or decrease the amplitude for all areas that have stimulation turned on:
1. Select the Program Tab in the Parameters panel.
2. Increase or decrease the amplitude as described above.
Bionic Navigator™ 3D 4.0 Programming Manual
92395591-02 36 of 1595
button under "Amplitude" to incrementally increase the
button to increase amplitude at a faster rate.
button under "Amplitude" to incrementally decrease the
button to decrease amplitude at a faster rate or press