Enabling Fast; Temporarily Saving Areas - Boston Scientific Bionic Navigator 3D 4.0 Manuel De Programmation

3. Select the Area Options drop-down menu icon
4. Select Clear.
5. A pop-up message will appear to confirm before clearing the area. Select OK.
Figure 27: Clear Area Dialog Box
Note: If you are clearing the last occupied area, the following message will display:
After clearing this Area, a default Area A will be created. Clear Area?

Enabling FAST

FAST (Fast Acting Sub-perception Therapy) is a programming option that is used in conjunction with
automated programming modes, especially with FAST I3D, to provide patients fast-acting, energy
efficient sub-perception therapy.
To enable the FAST programming option:
1. Select the Area you wish to enable with FAST programming option.
2. Select the Area Options drop-down menu icon
3. Select "..."
4. Click FAST.

Temporarily Saving Areas

During programming, there may be a need to temporarily store a specific contact configuration and
stimulation settings for later use. This configuration can later be copied into any Program's Area slots.
To temporarily save an Area:
1. Select the Area slot that contains the contact configuration and stimulation parameters you
wish to temporarily save.
2. Expand the Temporary Area Expander ("Temp Areas").
Note: When the Temp Areas is opened, the Central Points of Stimulation for the Temporary
Areas are shown on the Programs screen.
3. Select an empty slot, which will display "Click to save current settings".
Programming the Patient
.
.
Bionic Navigator™ 3D 4.0 Programming Manual
92395591-02 47 of 1595