Copying Areas To Other Area Slots; Clearing An Area - Boston Scientific Bionic Navigator 3D 4.0 Manuel De Programmation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 82
Bionic Navigator™ 3D 4.0 Programming Manual

Copying Areas to other Area Slots

The selected Area can be copied to another Area slot within the same program.
Figure 26: Programs Screen
To copy an Area to another Area slot within the same program:
1. Select the desired Program from the Program Carousel.
2. Select the Area you wish to copy.
3. Select the Area Options drop-down menu icon
4. Choose the Area slot you wish to "Copy" the Area to.
5. After the Area has been copied, the initial source Area will turn off and become inactive. The
new Area will become active and the stimulation state will be the same as the source Area
before the copy, e.g., stimulation will be on if the source Area was on before the copy.

Clearing an Area

To clear an Area from a Program:
1. Select the desired Program from the Program Carousel.
2. Select the Area you wish to clear.
Bionic Navigator™ 3D 4.0 Programming Manual
92395591-02 46 of 1595
.

Publicité

Table des Matières
loading

Table des Matières