Understanding Areas Slots; Turning Therapy On Or Off - Boston Scientific Bionic Navigator 3D 4.0 Manuel De Programmation

Bionic Navigator™ 3D 4.0 Programming Manual

Understanding Areas Slots

Each Area slot has the following components:
1 2 3
Figure 22: Area Slot
Component
1 Area Icon
2 Remote Icon
3 Area Name
4 Area Amplitude
5 Area Pulse Width
6 Area Rate
7 Area Options
8 Area ON/OFF Button

Turning Therapy ON or OFF

Therapy refers to patterns of stimulation used to reduce the awareness of pain. The stimulation that
provides this therapy can be turned on or off at the Area level and the Program level.
Bionic Navigator™ 3D 4.0 Programming Manual
92395591-02 38 of 1595
4 5 6 7
Description
The Area icon indicates whether an Area has been configured, and
whether that Area's stimulation is ON or OFF. If an Area has been
configured, it will contain an Area icon. If the Area stimulation is ON,
it will be green. If the Area stimulation is off, it will be white.
The Remote Control icon indicates whether the Area is active
(saved on the Remote Control) or not. If the area is active, the
Remote Control icon will appear active (in color). If the area is not
saved the Remote Control icon will appear inactive (grayed out).
It is possible for the Stimulation Area to be turned off, but still be
available in the Remote.
A name for each Area can be defined. Select the Area name field to
change it. After typing the name, press <enter> to save it.
Programmed amplitude for the Area.
Programmed pulse width for the Area.
Programmed rate for the Area.
Drop down menu that gives the option to copy the selected Area
slot to another slot within the same Program, clear the Area slot,
or enable FAST™. Refer to "Copying Areas to Other Area Slots",
"Clearing an Area", and "Enabling FAST".
Turns Therapy ON or OFF for the corresponding Area. If the Area is
turned OFF using this control, the Area will become inactive and not
be available in the Remote Control.
8