Boston Scientific Bionic Navigator 3D 4.0 Manuel De Programmation page 21

Figure 10b: FluoroSync Screen when connected to a 2-port Stimulator
The features on the FluoroSync screen are described in the following table:
Panel
1 Lead Selection
Panel
2 Lead Placement
Panel
Description
Displays all supported percutaneous and paddle Leads for the Stimulator.
Note:
• 1x8 percutaneous = Lead included in the Linear (ST) xxcm
8 Contact Lead kits and Avista MRI xxcm 8 Contact Lead kits.
• 1x8 percutaneous (4mm spacing) = Linear 3-4 lead xxcm 8 Contact
Lead kits
• 1x8 percutaneous (6mm spacing) = Linear 3-6 lead xxcm 8 Contact
Lead kits
• 1x16 percutaneous = Lead included in the Infinion xxcm
16 Contact Lead kits or in the Infinion CX xxcm 16 Contact Lead kits
• 2x8 paddle = Artisan and Artisan MRI xxcm 2x8 Surgical Lead kits
• 4x8 paddle (tightly-spaced) = CoverEdge 32 and CoverEdge 32 MRI
xxcm 4x8 Surgical Lead kits
• 4x8 paddle (widely-spaced) = CoverEdge X 32 and CoverEdge X 32
MRI xxcm 4x8 Surgical Lead kits
Note: xx denotes Lead length.
Illustrates and records the position of the Leads.
Configuring the CP and Stimulator
When connected to a 2-port
Stimulator, the FluoroSync screen
shows ports C and D.
Bionic Navigator™ 3D 4.0 Programming Manual
92395591-02 15 of 1595