Boston Scientific Bionic Navigator 3D 4.0 Manuel De Programmation page 20

Bionic Navigator™ 3D 4.0 Programming Manual
• Linear ST xxcm 8 Contact Lead
• Linear 3-4 xxcm 8 Contact Lead
• Linear 3-6 xxcm 8 Contact Lead
• Avista™ MRI xxcm 8 Contact Lead
• Artisan™ 2x8 Surgical Lead
• Artisan MRI xxcm 2x8 Surgical Lead
• CoverEdge™ 32 xxcm 4x8 Surgical Lead
• CoverEdge 32 MRI xxcm 4x8 Surgical Lead
• CoverEdge X 32 xxcm 4x8 Surgical Lead
• CoverEdge X 32 MRI xxcm 4x8 Surgical Lead
• 8 Contact Extensions
• 2x4 Splitters
• 2x8 Splitters
Note: xx denotes length (cm).
The WaveWriter Alpha and WaveWriter Alpha Prime Systems support 32 contact surgical Leads, or
any combination of 8 contact percutaneous, 16 contact percutaneous, and 16 contact surgical Leads
totaling up to 32 active contacts. The WaveWriter Alpha 16 and WaveWriter Alpha Prime 16 Systems
support 16 contact (2x8) surgical Leads, 16 contact percutaneous Leads, or a combination of 8 contact
percutaneous Leads, totaling up to 16 active contacts.
The FluoroSync screen can be accessed by selecting the FluoroSync
Configuration screen.
1 2
4
Figure 10a: FluoroSync Screen when connected to a 4-port Stimulator
Bionic Navigator™ 3D 4.0 Programming Manual
92395591-02 14 of 1595
3
11
6
8
7
When connected to a 4-port
Stimulator, the FluoroSync screen
9
shows ports A, B, C and D.
Note: Throughout this manual,
the FluoroSync screen is shown
connected to a 4-port Stimulator
10
5
button from the