Selecting Areas For Level Control - Boston Scientific SC-5210 Manuel

The Remote Control
The bar replacing the up arrow means that you have reached the maximum allowable level and can only decrease the stimulation
setting. The bar replacing the down arrow means that you have reached the minimum level and can only increase the stimulation
setting.

Selecting Areas for Level Control

Your Remote Control may have as many as four therapy areas stored for your use. Each area will have a name or a number
(1 through 4) which was assigned during your programming at the clinic. The stimulation level for each of these areas is controlled
from an individual "area level" screen. To change the stimulation strength of a single area:
1. From the main Level screen, press the button as many times as necessary to cycle through your programmed area Level
"
screens.
Note: Button presses will move from one area to the next and will eventually return you to the Level screen.
Patient System Handbook
9055960-003 REV B 17 of 233