Disassociating A Patient; Displaying Cp And Stimulator Information - Boston Scientific Bionic Navigator 3D 4.0 Manuel De Programmation

Bionic Navigator™ 3D 4.0 Programming Manual

Disassociating a Patient

You can disassociate or remove a patient profile from an External Trial Stimulator.
Note: The Disassociate button only displays on the Configuration Connect screen when a Patient
profile is assigned to a Stimulator and a connection has been established between CP and Stimulator.
From the Connect screen:
1. Select the
2. The Patient profile is removed from the Stimulator and the programming connection
between the CP and the Stimulator is terminated. All programming, usage, Lead
configuration data are also removed, and the Stimulator is automatically placed back into
pairing mode.

Displaying CP and Stimulator Information

You can view additional information for the CP or Stimulator from the Connect screen.
1. Select the CP image to display the following CP information:
• System Date
• System Time
• Installation Confirmation Key
• Install Date
• Software Version
• Software Part Number
Bionic Navigator™ 3D 4.0 Programming Manual
92395591-02 12 of 1595
button for the Stimulator to which the Patient is currently associated.