Boston Scientific Bionic Navigator 3D 4.0 Manuel De Programmation page 62

Bionic Navigator™ 3D 4.0 Programming Manual
Component
1 Default Pulse Width
Control
2 Lock access in Remote
Control for new
Stimulators
3 Save
4 Close
Changing the Settings on the Patient Configuration Tab
1. Select the
decrease the Default Pulse Width.
2. Check the appropriate boxes to lock out patient access from the Remote Control:
• Pulse Width
• Rate
• Main Menu
• Area Menu
• Programs and Schedules Menu
Bionic Navigator™ 3D 4.0 Programming Manual
92395591-02 56 of 1595
Description
Allows you to increase or decrease default value for pulse width
Allows you to specify which parameters can be locked out from
patients on the Remote Control.
NOTE: This is a global default setting that applies to all newly
configured Stimulators. To change this setting for an individual
Stimulator, refer to "Specifying Remote Control Locks".
Allows you to save changes.
Closes the window.
button to increase the Default Pulse Width or select the button to