Lead Group Panel - Boston Scientific Bionic Navigator 3D 4.0 Manuel De Programmation

6 Advanced Options
Tab
7 Polarity and
Percentage Control
Equalize Control
8
9 Clear All

Lead Group Panel

Expanding the Full View Tab displays the Lead Group panel. The Lead Group panel displays
configured Leads in each Lead Group. The Bionic Navigator 3D 4.0 software displays the anode and
cathode configuration. This will help visualize what contacts are being used to make programming
more efficient.
1
Figure 20: Lead Group Panel
When expanded, displays Resolution
and Focus controls. Refer to "Selecting
Advanced Options".
Use to change polarity (cathode or anode)
and percentage after selecting an individual
contact or the case.
Use to equally distribute all cathodic or
anodic current among active contacts in the
selected Area.
Sets all electrode polarities to off.
2
3
Programming the Patient
Area Tab
Area Tab (Manual Mode
only)
Area Tab (Manual Mode
only)
Area Tab (Manual Mode
only)
4
Bionic Navigator™ 3D 4.0 Programming Manual
92395591-02 31 of 1595