Rohde Fusing Serie Notice D'utilisation page 81

Lifting the kiln (FE 250–FE 1000 S)
5.4.4. Separating the kiln (Fusing)
General safety information
DANGER
Risk of death!
Risk of electric shock.
DANGER
Risk of serious personal injury or death and material damage to the kiln by touching live
parts when operating.
⇒
⇒
⇒
WARNING
Risk of serious personal injury and property damage:
At least two people should carry out the work due to the high dead weight of the kiln parts.
Only carry out work when the kiln is safe and de-energised.
Unplug the power plug.
Before starting work, you must check whether the kiln can be switched on and
whether there is still residual energy in the kiln.
79 / 298 - EN -
⇒
Transport the kiln without a pallet by lifting
it only by the stiffening braces at the
bottom of the kiln casing.
⇒
Guide the tines of the lifting unit of the
industrial truck or hoist under the kiln
casing.
⇒
Drive the industrial truck or move the hoist
under the kiln from the right side (the side
without the electrical box on the lid).
⇒
Close the lid and use load restraints.
⇒
When lifting, be careful not to damage the
power cable.