Rohde Fusing Serie Notice D'utilisation page 111

13.4. Spare parts
Replace defective components immediately. Only use ROHDE original spare parts.
13.5. Tightening torques
Unless otherwise specified, the following general tightening torques apply to screw connections on the kiln:
Thread Torque [Nm]
M3
M4
M5
M6
M8
M10
M12
13.6. Adjusting the lid catch (FE)
In order for the lid to seal optimally, it may be necessary to readjust the stops on the lid catch.
Step Action
1 Turn off the kiln and let it cool down.
2 Open the lid.
3 Loosen the lock nut of the bolt.
1.5
3
6
10
25
49
80
109 / 298 - EN -