Rohde Fusing Serie Notice D'utilisation page 77

WARNING
Risk of serious personal injury and property damage caused by removed or
decommissioned protective equipment and covers or missing or illegible warnings.
⇒
⇒
⇒
4.4.2. Types of protective equipment installed
Protective equipment that is attached to potential danger spots consists of:
Protective equipment
Mains circuit breaker
Kiln lid
Fixed guards
Control engineering protective
equipment
Warning and safety markings on the kiln
4.5. Intended use
4.5.1. General safety information
DANGER
Risk of serious personal injury, property damage and even death due to improper use
of the kiln.
⇒
⇒
⇒
It is not permitted to dismantle or remove protective equipment, covers or warning
signs during operation.
Regularly check protective equipment, covers and warning signs to ensure they are
in perfect condition.
Replace missing or illegible warning signs.
Function
Shuts down the kiln in the event of an incident and emergency
Prevents access to the firing chamber during operation
Electrical box/switch box cover to protect against contact and
electric shock
Control system for controlling and regulating firing to protect
against:
• overtemperature
• ramp rates and programming (firing mode) outside the physical
limits of the kiln
Information about danger areas
Use the kiln only as intended and in technically perfect condition!
The kiln is only intended for the use described. Any use beyond this is considered
improper and is not permitted.
The manufacturer is not liable for any resulting damage.
75 / 298 - EN -