Rohde Fusing Serie Notice D'utilisation page 109

12.2. General information
Follow the maintenance instructions below to ensure proper operation and the long service life of the kiln. Carry out
maintenance and inspection work at the intervals listed below. Replace defective components immediately.
12.3. Maintenance intervals
12.3.1. Mechanical components
Action
Visual inspection of the kiln casing
Visual inspection of the lid
Visual inspection of the lid mechanism
(Hinge, stop and lock)
Visual inspection of the firing chamber insulation
Clean the outside of the kiln
Visual inspection of the view port and sealing plug
Cleaning the kiln
Visual inspection of the electrical box
Visual inspection of the clamp, plug and screw
connections on the kiln
12.3.2. Electrical components
Action
Required maintenance work
Visual inspection of the control system,
connection cable and socket on the kiln
Visual inspection of the infrared heaters
Visual inspection of the power cable
Visual inspection of the connection
terminals of the heating elements
Cleaning the electrical box
Clean the electrical components
Visual inspection of the clamp, plug and
screw connections on the kiln
Check the electrical wiring
Check the electrical components
Check the function and attachment of
the safety devices
Replacing the safety contacts
Weekly
X
X
X
X
X
X
X
Interval
Every 6
Weekly
months
X
X
X
107 / 298 - EN -
Every 6 months Every 12 months
X
Every 12 Operating
months personnel
X
X
X
X
X
X
X
X
X
X
X
X
Staff
Electrician
X
X
X
X
X
X
X
X