Rohde Fusing Serie Notice D'utilisation page 114

13.8.2. Replacing the infrared heaters (heating elements).
NOTE
Have the infrared heater and quartz glass tubes replaced by a qualified electrician or by
a local specialist.
INFORMATION
We recommend the replacement of all heating elements in the kiln when they are worn
out.
14. Faults
14.1. General safety information
DANGER
Risk of serious personal injury, property damage and even death caused by work
carried out on the electrical equipment by unqualified personnel.
In particular, only have troubleshooting measures on the kiln carried out by qualified
specialists who have been specially trained and authorised.
DANGER
Risk of serious personal injury or death and material damage to the kiln by touching live
parts when operating.
⇒ Only carry out troubleshooting measures when the kiln is safe and de-energised.
⇒ Unplug the power plug.
⇒ Ensure the kiln is de-energised for the duration of the work.
⇒ Before starting work, you must check whether the kiln can still be switched on.
⇒ Put up warning signs that indicate work is being carried out.
⇒ Let hot kiln components cool down before starting work.
⇒ After completing the work, check all loosened connections and check that the
cables are firmly seated and that the protective equipment is functioning properly.
112 / 298 - EN -