Image Brightness Control Buttons; Image Brightness Indicator - Boston Scientific LithoVue Manuel D'utilisation

Light On after a button press
After a short period of time, the Light On/Off button will then change to display the default Light On
indicator noted above.

Image Brightness control Buttons

When the light is on, pressing the button increases the image brightness. Pressing the button
decreases the image brightness. After each button press, the buttons will briefly illuminate to
acknowledge the button press before returning to the default state.
Default Image Brightness Control Buttons
Image Brightness Control Buttons after a button press

Image Brightness Indicator

The bars of this indicator illuminate to indicate the brightness of the image. There are five brightness
levels available for user adjustment using the Image Brightness Control Buttons.
Lowest
Setting
(No
Light
Output)
time remaining Indicator
The LithoVue™ Flexscope is a single-use device. To help mitigate the potential for re-sterilization and
re-use of the LithoVue Flexscope, the System Workstation monitors how long the LithoVue Flexscope
has been connected and provides graphical feedback to the user.
The bars and color of this indicator change to indicate LithoVue Flexscope status, as noted in table 4�1�
Once the Orange Blinking time remaining Indicator appears, the user has 30 minutes to complete the
procedure before the LithoVue Flexscope ceases to function.
28
Black (K) ∆E ≤5.0
Level 0 Level 1 Level 2 Level 3 Level 4 Level 5
Highest
Setting
(Maximum
Light
Output)
User's Manual