4�3 Main Operating Screen - Boston Scientific LithoVue Manuel D'utilisation

4�3 MAIn oPErAtInG ScrEEn
Main operating Screen Features
The main operating screen (see Figure 4�5) includes the features decribed in the sections below.
notE: On-screen buttons are activated by a finger-press.
Figure 4�5 – Main operating Screen
Light On/Off
Image
Brightness
Image Brightness Indicator
Light on/off Button
When the System Workstation is turned on and a new LithoVue™ Flexscope is connected, the system
will default to Light On. Any subsequent scope connections while the System Workstation is turned on
will default to on or off depending on the status of the Light On/Off button.
Each press of the Light On/Off button will toggle the scope illumination between on and off.
Default Light On indicator
When the Light On button is pressed, the icon will change and briefly illuminate to acknowledge the
button press.
Light Off after a button press
After a short period of time, the Light On/Off button will then change to display the default Light Off indicator.
Default Light Off indicator
When the Light Off button is pressed, the icon will change and briefly illuminate to acknowledge the
button press.
User's Manual
Time Remaining Indicator
Live Video Image/
Message Screen
Display Area
Controls Swap
27
Black (K) ∆E ≤5.0