The Remote Control; Basic Operation - Boston Scientific Vercise DBS Mode D'emploi

Physician Manual

The Remote Control

Basic Operation

The Remote Control communicates with the Stimulator through a radio frequency
(RF) telemetry link from a distance of 18 inches (45 cm). When it is not being used,
the Remote Control is in sleep mode from which it can be reactivated by any button
press. During normal patient use, the Remote Control will transition to sleep mode
automatically after 60 seconds of non-use.
1. Area Button
2. Up/Activate
3. Down/Save
Some Remote Control functions (i.e., the Restore option and Clinician Mode) are
accessed by pressing and holding a button (for approximately three seconds). These
are identified in the appropriate sections following.
Physician Manual
91098825-07 Rev A 46 of 333
4. Program Button
5. Stimulation On/Off