3�3 Transportation, Use And Storage - Boston Scientific LithoVue Manuel D'utilisation

1. Confirm that the external monitor and/or DVI switcher meets the specifications described in
Section 3.4 "System Workstation Device - Accessory Compatibility".
2. Connect the supplied DVI Cable from the DVI output jack on the bottom of the System Workstation
to the DVI In jack on the external monitor or DVI switcher.
3. Turn on the external monitor. The video image (but no touch screen buttons) will be displayed on
the external monitor.
cAUtIon: Users are responsible for using appropriate audio-visual equipment and for
verifying proper installation prior to use�
3�3 trAnSPortAtIon, USE And StorAGE
The following instructions provide information for proper movement and storage of the System Workstation.
1. Ensure the Power Cord is securely looped around the Cart's Cord Wrap Hook to prevent cord
damage during transportation.
2. Lift the pedal on the locking casters to unlock the System Workstation and move to the desired
location. To ensure safe movement of the system, check that the wheels are free of obstacles.
3. Store the System Workstation in an area that is safe from impact or other accidental damage.
4. Confirm that storage area environment is within the limits provided in table 3�1.
5. Confirm that the storage area is free from risk of water leakage or splashes.
6. Push pedal on the locking casters down to secure the system's position. This will prevent
accidental rolling and potential impact damage.
table 3�1 transportation, use, and storage environmental limits
Environmental Limits during Use
Ambient temperature (°C)
Relative humidity (%)
Atmospheric pressure (hPa)
Environmental Limits during transport and Storage
Ambient temperature (°C)
Relative humidity (%)
Atmospheric pressure (hPa)
User's Manual
10 to 35
30 to 75 RH (non-condensing)
700 to 1060
-20 to 60
10 to 90 RH (non-condensing)
500 to 1060
21
Black (K) ∆E ≤5.0