The Remote Control; Buttons And Basic Operation; Basic Operation - Boston Scientific SC-5210 Manuel

4

The Remote Control

Each button on the Remote Control activates one or more of the stimulation functions
which are described in detail on the following pages of this section.

Buttons and Basic Operation

To use most Remote Control functions, you will simply press a button as you would on a
TV remote control. Other functions require a "long press," which is described in "Selecting
Options" on page 22.

Basic Operation

When it is not being used, the Remote Control sets itself in a "sleep" or idle mode and the display screen is blank. During this sleep
mode when you press any button except the
shown below.
Note: Iconic screens are displayed next to language screens and are applicable to Model SC-5212 only.
1. Area Button 4. Program Button
2. Up/Activate 5. Stimulation On/Off
3. Down/Save
button (stimulation on/off), the Remote Control will "wake up" and display the screen
!
Patient System Handbook
9055960-003 REV B 11 of 233