Removing The Front Panel Side Screws And Washers; Rack Mounting Instruments Side-By-Side; Sliding Support Shelf - Keysight Truevolt Serie Mode D'emploi

Removing the Front Panel Side Screws and Washers

This step is valid for instrument model with serial number stated below:
34461A and 34470A: serial number MY60020599 onwards
l
34460A and 34465A: serial number MY60016557 onwards
l
To remove the side screws and washer, use Ponzi driver size 2.

Rack Mounting Instruments Side-by-Side

To rack mount two instruments side-by-side, order lock-link kit 5061- 8769 and flange kit 5063-9212. Be
sure to use the support rails in the rack cabinet.

Sliding Support Shelf

To install one or two instruments in a sliding support shelf, order shelf 5063-9255 and slide kit 1494-
0015. For a single instrument, also order filler panel 5002-3999.
Keysight Truevolt Series Operating and Service Guide
Quick Start
45