Publicité
Les langues disponibles
Les langues disponibles
SCPI Programming Reference
SCPI Programming Reference
This section contains information to help you program the Keysight Truevolt Series digital multimeters
over a remote interface using the SCPI programming language.
Introduction to the SCPI Language
Commands by Subsystem
Command Quick Reference
SCPI Error Messages
Power-On and Reset State
Related Information
IO Libraries and Instrument Drivers
The Keysight IO Libraries Suite software and installation instructions are on the Keysight Automation
Ready CD-ROM provided with your instrument (optional for 34460A).
Keysight Truevolt Series Documentation
The latest product documentation is available at www.keysight.com/find/truevolt-doc. For doc-
umentation for mobile devices, see www.keysight.com/find/truevolt-mobilehelp.
For information about connecting instruments to USB, LAN and GPIB interfaces and how to configure and
troubleshoot these interfaces, refer to Keysight IO Libraries help. The Keysight IO Libraries can be down-
loaded from www.keysight.com/find/iosuite.
Web Interface
The 34461A/65A/70A and the 34460A (with option 34460A-LAN or option 3446LANU) have a Web Inter-
face built into the instrument. You can use this interface over LAN for remote access and control of the
instrument via a Web browser. See
Web Interface
for details.
194
Keysight Truevolt Series Operating and Service Guide
Publicité
