Publicité
Les langues disponibles
Les langues disponibles
Calibration Adjustment Procedures
Calibration Security
This section describes the instrument's calibration security system. If you forget the security code, you
can
override calibration
security.
Security Overview
A security code (calibration password) prevents accidental or unauthorized instrument calibration.
When shipped from the factory, the instrument is secured, with the security code (calibration pass-
l
word) set to AT3446XA.
The same security code must be used for front panel and remote operation. If you secure the instru-
l
ment from the front panel, use that same code to unsecure it from the remote interface.
This setting is non-volatile; it will not be changed by power cycling or
l
Security code rules:
l
Unquoted string up to 12 characters
Must start with letter (A-Z)
May contain letters, numbers (0-9) and underscores
Front Panel: [Utility] > Test / Admin > Security
l
SCPI:
CALibration:SECure:STATe
l
532
*RST
or SYSTem:PRESet.
Keysight Truevolt Series Operating and Service Guide
Publicité
