Install The Batteries - Keysight U1271A Guide De Démarrage Rapide

Differences between the U1271A and U1272A
The U1272A model offers these additional
functions:
– Z
– Smart Ω measurements
– Auto-diode tests
– AC+DC voltage and current measurements
– J-type thermocouple temperature
– 30 Ω and 300 MΩ ranges for resistance
– dBm and dBV measurements with selectable
– Data logging up to 10,000 memories
The U1271A model has one differing function:
– Qik-V tests

Install the Batteries

Your multimeter is powered by four 1.5 V AAA
alkaline batteries (included with the shipment).
1 Turn the rotary switch to OFF
2 Lift the tilt stand and loosen
3 Remove the battery cover and observe the
4 Insert the batteries and replace the battery
4
(low input impedance) measurements
LOW
measurements
measurements
impedance
and remove the test leads
from the terminals.
the screws with a suitable
Phillips screwdriver.
polarity markings.
cover and screws.
Keysight U1271A/U1272A Quick Start Guide