Publicité
Les langues disponibles
Les langues disponibles
CALCulate:SMOothing[:STATe] {OFF|ON}
CALCulate:SMOothing[:STATe]?
Enables or disables a smoothing (moving average) filter on the measurements. Smoothing is intended to
average out small variations in the measurements. Larger variations will cause the filter to reset.
Parameter
{ON|1|OFF|0}. Default: ON.
Enable a 50-point moving average filter on 1000 measurements:
CONF:VOLT 10
SAMP:COUN 1000
CALC:SMO:RESP MED
CALC:SMO:STAT ON
CALC:STAT ON
READ?
Typical Response:+9.99383828200000E+03,+9.99352315400000E+03,... (1000 measurements)
Applies only to the 34465A and 34470A.
l
The
CALCulate
subsystem and the individual calculate functions are disabled for timestamp meas-
l
urements.
The instrument disables the smoothing (moving average) filter after a Factory Reset (*RST) or an
l
Instrument Preset (SYSTem:PRESet).
Keysight Truevolt Series Operating and Service Guide
Typical Return
0 (OFF) or 1 (ON)
SCPI Programming Reference
235
Publicité
