Publicité
Les langues disponibles
Les langues disponibles
SCPI Programming Reference
SYSTem:COMMunicate:LAN:GATeway "<address>"
SYSTem:COMMunicate:LAN:GATeway? [{CURRent|STATic}]]
Assigns a default gateway for the instrument. The specified IP Address sets the default gateway, which
allows the instrument to communicate with systems that are not on the local subnet. Thus, this is the
default gateway where packets are sent that are destined for a device not on the local subnet, as determ-
ined by the
Subnet Mask
If you change this setting, you must send
activate the new setting.
Parameter
nnn.nnn.nnn.nnn
Command: "
Query: {CURRent|STATic}. Default: CURRent.
Set default gateway address:
SYST:COMM:LAN:GATEWAY "198.105.232.1"
SYST:COMM:LAN:UPD
CURRent: returns address currently being used by the instrument.
l
STATic: returns static address from non-volatile memory. This address is used if DHCP is disabled or
l
unavailable.
SYSTem:SECurity:IMMediate
l
On the 34460A, this requires option 34460A-LAN or option 3446LANU.
l
If DHCP is enabled
(SYSTem:COMMunicate:LAN:DHCP
l
used. However, if the DHCP server fails to assign a valid
gateway is used.
This setting is non-volatile; it is not changed by power cycling, a Factory Reset (*RST), or an Instru-
l
ment Preset (SYSTem:PRESet).
410
setting. Contact your LAN administrator for details.
". Default: "0.0.0.0".
sets this parameter to its default value.
SYSTem:COMMunicate:LAN:UPDate
Typical Return
"198.105.232.1"
ON), the specified default gateway is not
IP
address, the currently configured default
Keysight Truevolt Series Operating and Service Guide
to
Publicité
