Charging The Battery - Keysight U1251B Guide De Démarrage Rapide

Charging the Battery

Use the specified accessory, the 24 V DC adaptor
to charge the battery.
1 Remove and disconnect the test leads from
2 Turn the rotary switch to the
3 Plug the Red (+)/ Black (–) banana terminals
4
the meter.
Connect the power cord to the DC adapter.
of the DC adapter to the
terminals respectively. The DC adaptor can be
replaced with a DC power supply in order to
set the 24 V DC output and the over current
limitation to a value more than 0.5 A. Ensure
that the polarity of the connection is correct.
Keysight U1251B and U1252B Quick Start Guide
position.
and the COM