Keysight Truevolt Serie Mode D'emploi page 426

TRIGger Subsystem
The TRIGger subsystem configures the triggering that controls measurement acquisition.
Recommendation: All triggered measurements should be made using an
appropriate fixed manual range. That is, turn autorange off ([SENSe:]<func-
tion>:RANGe:AUTO OFF) or set a fixed range using the
[SENSe:]<function>:RANGe, CONFigure, or
Command Summary
TRIGger:COUNt
TRIGger:DELay
TRIGger:DELay:AUTO
TRIGger:LEVel
TRIGger:SLOPe
TRIGger:SOURce
Keysight Truevolt Series Operating and Service Guide
SCPI Programming Reference
MEASure command.
427